Cookie Img
Back to top
Home » Products » Optical Test Equipments » VT3110C Optical Fiber Cleaver

VT3110C Optical Fiber Cleaver

VT3110C Optical Fiber Cleaver
VT3110C Optical Fiber Cleaver
Product Code : VT3110C
Product Description

Specification

VT3110C Optical Fiber Cleaver

Suitable fiber

Single fiber

Coating diameter

0.25mm&0.9mm

Cladding Diameter

125um

Cleaving length

9~16mm(0.25mm)

10~16mm(0.9mm)

Cleaving angle

0.5°

Blade life

36000 times

Weight

Approx. 430g

Dimension

63(W ) X 84( D ) X 63( H ) mm

II. Structure:

III. Operating Procedures

1. Open the top clamp lever and the lid of the single fiber adapter. The blade carriage should be in the forward position.

2. Lower the fiber straight into the correct V-groove with the end of the fiber coating (e.g. if the cleave length is 16mm) at the 16mm mark on the ruler.

3. Close the lid of the single fiber adapter.

4. Lower the top clamp lever. Slide the blade carriage to the rear of the cleaver. The fiber will be cleaved.

5: Open the top clamp lever. Then open the lid of the single fiber adapter and lift the newly cleaved fiber. Lift the off-cut and dispose it properly.

IV. Ordering Information

Standard Accessory

Optical Fiber Cleaver with off-cut collector

1 pc

Carrying Case

1 pc

Operation Manual

1 pc

Optional Accessory

Replacement Blade

1 pc